Area conversion
Square metres to Square feet (m² to ft²)
Compare a room or property area in square metres with square feet. Enter the area, not one side length, and keep the listing’s measurement basis in mind.
1 m² ≈ 10.7639 ft² — the calculator keeps the stored factor; this summary may be rounded.
A flat listed with an area of 60 m²
- Starting measurement
- 60 m²
- Converted value (rounded if needed)
- 645.835 ft²
Check whether two listings include the same spaces, such as internal rooms or balconies. Converting their units cannot reconcile different area definitions.
Square metres to Square feet conversion chart
| square metres | square feet |
|---|---|
| 1 m² | 10.7639 ft² |
| 2 m² | 21.5278 ft² |
| 3 m² | 32.2917 ft² |
| 4 m² | 43.0556 ft² |
| 5 m² | 53.8196 ft² |
| 10 m² | 107.639 ft² |
| 15 m² | 161.459 ft² |
| 20 m² | 215.278 ft² |
| 25 m² | 269.098 ft² |
| 30 m² | 322.917 ft² |
| 40 m² | 430.556 ft² |
| 50 m² | 538.196 ft² |
| 60 m² | 645.835 ft² |
| 75 m² | 807.293 ft² |
| 100 m² | 1076.39 ft² |
| 150 m² | 1614.59 ft² |
| 200 m² | 2152.78 ft² |
| 250 m² | 2690.98 ft² |
| 500 m² | 5381.96 ft² |
| 750 m² | 8072.93 ft² |
| 1000 m² | 10763.9 ft² |
How to convert by hand
Reference relationship (display may be rounded)
1 m² = 10.7639104 ft²
- Multiply the amount in square metres by the number of square feet per unit.
- Use the calculator for the stored precision; copying a short displayed factor introduces extra rounding.
- Round the result to suit your measurement, after completing the calculation.
Related conversions
About square metres and square feet
Area conversions apply to the whole surface or plot. They cannot tell you a room’s width, a boundary length or how much material to allow for cutting waste.
Square metre
Metric (SI)The area of a square one metre on each side. Square metres measure surface area, not a single edge length.
Commonly used for: Floor plans, flooring coverage and property areas.
Square foot
US / ImperialThe area of a square one international foot on each side, about 0.0929 m².
Commonly used for: Property listings, room areas and material coverage.
Questions
Can I use the metres-to-feet factor for an area?
Not by itself. Area has two length dimensions, so the length factor must be squared. This page applies the area factor directly; enter the square-metre total once.
How do I convert square feet back to square metres?
Enter the value in the square feet field above to work backwards, or open the Square feet to Square metres converter. This uses the stored factors rather than dividing by a rounded number copied from the chart.
Why might the chart and calculator show different decimal places?
The chart uses a compact rounded display. The editable calculator can show up to six decimal places and uses the factors or temperature formulas stored in the library. More displayed digits do not make the original measurement more precise.
Precision and source
The calculator uses stored conversion factors and temperature formulas, then rounds the result for display. A short decimal in a chart is not a claim of exactness. For a calculation with several steps, keep as much precision as the original measurement supports and round at the end.
Reference: NIST SP 811 conversion factors. Its alphabetical tables distinguish unit variants and temperature readings from intervals. Published by ToolsNow. Report a conversion problem.
Need a different unit?
The full converter handles length, mass, volume, area, speed and temperature, including separate choices for US and UK liquid measures.
Open the unit converter